Skip to contentSkip to conversation

Change in openvpn[master]: README.dco: update Linux instructions

Openvpn-devel In review ordex (Code Review) 2 participants 12 messages Jul 16, 2025 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): gerrit.1752669697000.I22af9957b27785514d8c6d58fe4f2100d007fa5c@...2715...

#1 lore raw

Attention is currently required from: flichtenheld, plaisthos.

Hello plaisthos, flichtenheld,

I'd like you to do a code review.
Please visit

    http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email

to review the following change.

Change subject: README.dco: update Linux instructions
......................................................................

README.dco: update Linux instructions

Update the README.dco file by including instructions related to the new 'ovpn' linux kernel module.

Change-Id I22af9957b27785514d8c6d58fe4f2100d007fa5c

---
M README.dco.md

1 file changed, 12 insertions(+), 16 deletions(-)

git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/87/1087/1

README.dco.md +12 -16
index 3f7e00c..8c2ff87 100644
@@ -14,26 +14,22 @@
 
 Getting started (Linux)
 -----------------------
-- Use a recent Linux kernel. Linux 5.4.0 and newer are known to work with
-  ovpn-dco.
+The new DCO linux kernel module (namely `ovpn`) has been merged upstream
+as of linux-6.16. From this kernel version onwards you directly get
+the DCO module as shipped by your kernel.
+NOTE: the new `ovpn` Linux kernel module is compatible only with OpenVPN
+2.7 and greater.
 
-Get the ovpn-dco module from one these urls and build it:
+Alternatively, if you run an older kernel or if you want to use a more
+recent DCO module than the one shipped by your kernel, you need to use
+the ovpn-backports project.
 
-* https://gitlab.com/openvpn/ovpn-dco
-* https://github.com/OpenVPN/ovpn-dco
+To learn how to use the ovpn-backports project and build your own DCO
+kernel module, please refer to the README file available at:
 
-e.g.
+  https://github.com/OpenVPN/ovpn-backports/blob/main/README.md
 
-    git clone https://github.com/OpenVPN/ovpn-dco
-    cd ovpn-dco
-    make
-    sudo make install
-
-If you want to report bugs please ensure to compile ovpn-dco with
-`make DEBUG=1` and include any debug message being printed by the
-kernel (you can view those messages with `dmesg`).
-
-Clone and build OpenVPN (or use OpenVPN 2.6+). For example:
+Then clone and build OpenVPN (or use OpenVPN 2.7+). For example:
 
     git clone https://github.com/openvpn/openvpn.git
     cd openvpn

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings

Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I22af9957b27785514d8c6d58fe4f2100d007fa5c
Gerrit-Change-Number: 1087
Gerrit-PatchSet: 1
Gerrit-Owner: ordex <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-MessageType: newchange

#2 lore raw
In reply to a message not in the archive

Attention is currently required from: ordex, plaisthos.

flichtenheld has posted comments on this change. ( http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email )

Change subject: README.dco: update Linux instructions
......................................................................

Patch Set 1: Code-Review-1

(1 comment)

File README.dco.md:

http://gerrit.openvpn.net/c/openvpn/+/1087/comment/7c091c1d_5c4660b7 :
PS1, Line 47: ovpn
Should replace remaining occurrences of "ovpn-dco"

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings

Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I22af9957b27785514d8c6d58fe4f2100d007fa5c
Gerrit-Change-Number: 1087
Gerrit-PatchSet: 1
Gerrit-Owner: ordex <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: ordex <[email protected]...>
Gerrit-Comment-Date: Wed, 16 Jul 2025 13:07:11 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment

#3 lore raw
In reply to a message not in the archive

Attention is currently required from: flichtenheld, plaisthos.

ordex has posted comments on this change. ( http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email )

Change subject: README.dco: update Linux instructions
......................................................................

Patch Set 1:

(1 comment)

File README.dco.md:

http://gerrit.openvpn.net/c/openvpn/+/1087/comment/d21afb4d_2a0ea7bb :
PS1, Line 47: ovpn

Quoted 1 line

Should replace remaining occurrences of "ovpn-dco"

makes sense. However, I'll limit the renaming to this section only. Because more in general we still use the term "ovpn-dco"

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings

Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I22af9957b27785514d8c6d58fe4f2100d007fa5c
Gerrit-Change-Number: 1087
Gerrit-PatchSet: 1
Gerrit-Owner: ordex <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Comment-Date: Wed, 16 Jul 2025 13:16:27 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: flichtenheld <[email protected]...>
Gerrit-MessageType: comment

#4 lore raw
In reply to a message not in the archive

Attention is currently required from: flichtenheld, plaisthos.

Hello flichtenheld, plaisthos,

I'd like you to reexamine a change. Please visit

    http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email

to look at the new patch set (#2).

The following approvals got outdated and were removed:
Code-Review-1 by flichtenheld

Change subject: README.dco: update Linux instructions
......................................................................

README.dco: update Linux instructions

Update the README.dco file by including instructions related to the new 'ovpn' linux kernel module.

Change-Id I22af9957b27785514d8c6d58fe4f2100d007fa5c

---
M README.dco.md

1 file changed, 14 insertions(+), 18 deletions(-)

git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/87/1087/2

README.dco.md +14 -18
index 3f7e00c..fc4334e 100644
@@ -14,26 +14,22 @@
 
 Getting started (Linux)
 -----------------------
-- Use a recent Linux kernel. Linux 5.4.0 and newer are known to work with
-  ovpn-dco.
+The new DCO linux kernel module (namely `ovpn`) has been merged upstream
+as of linux-6.16. From this kernel version onwards you directly get
+the DCO module as shipped by your kernel.
+NOTE: the new `ovpn` Linux kernel module is compatible only with OpenVPN
+2.7 and greater.
 
-Get the ovpn-dco module from one these urls and build it:
+Alternatively, if you run an older kernel or if you want to use a more
+recent DCO module than the one shipped by your kernel, you need to use
+the ovpn-backports project.
 
-* https://gitlab.com/openvpn/ovpn-dco
-* https://github.com/OpenVPN/ovpn-dco
+To learn how to use the ovpn-backports project and build your own DCO
+kernel module, please refer to the README file available at:
 
-e.g.
+  https://github.com/OpenVPN/ovpn-backports/blob/main/README.md
 
-    git clone https://github.com/OpenVPN/ovpn-dco
-    cd ovpn-dco
-    make
-    sudo make install
-
-If you want to report bugs please ensure to compile ovpn-dco with
-`make DEBUG=1` and include any debug message being printed by the
-kernel (you can view those messages with `dmesg`).
-
-Clone and build OpenVPN (or use OpenVPN 2.6+). For example:
+Then clone and build OpenVPN (or use OpenVPN 2.7+). For example:
 
     git clone https://github.com/openvpn/openvpn.git
     cd openvpn
@@ -48,8 +44,8 @@
 data channel offloading, OpenVPN will automatically disable DCO support and
 warn the user.
 
-Should OpenVPN be configured to use a feature that is not supported by ovpn-dco
-or should the ovpn-dco kernel module not be available on the system, you will
+Should OpenVPN be configured to use a feature that is not supported by ovpn
+or should the ovpn kernel module not be available on the system, you will
 see a message like
 
     Note: Kernel support for ovpn-dco missing, disabling data channel offload.

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings

Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I22af9957b27785514d8c6d58fe4f2100d007fa5c
Gerrit-Change-Number: 1087
Gerrit-PatchSet: 2
Gerrit-Owner: ordex <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-MessageType: newpatchset

#5 lore raw
In reply to a message not in the archive

Attention is currently required from: flichtenheld, plaisthos.

ordex has posted comments on this change. ( http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email )

Change subject: README.dco: update Linux instructions
......................................................................

Patch Set 2:

(1 comment)

File README.dco.md:

http://gerrit.openvpn.net/c/openvpn/+/1087/comment/73a91b8d_bfd6cc02 :
PS1, Line 47: ovpn

Quoted 1 line

makes sense. However, I'll limit the renaming to this section only. […]

Done

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings

Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I22af9957b27785514d8c6d58fe4f2100d007fa5c
Gerrit-Change-Number: 1087
Gerrit-PatchSet: 2
Gerrit-Owner: ordex <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Comment-Date: Wed, 16 Jul 2025 13:20:18 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: flichtenheld <[email protected]...>
Comment-In-Reply-To: ordex <[email protected]...>
Gerrit-MessageType: comment

#6 lore raw
In reply to a message not in the archive

Attention is currently required from: ordex, plaisthos.

flichtenheld has posted comments on this change. ( http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email )

Change subject: README.dco: update Linux instructions
......................................................................

Patch Set 2: Code-Review+2

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings

Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I22af9957b27785514d8c6d58fe4f2100d007fa5c
Gerrit-Change-Number: 1087
Gerrit-PatchSet: 2
Gerrit-Owner: ordex <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: ordex <[email protected]...>
Gerrit-Comment-Date: Wed, 16 Jul 2025 13:27:46 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment

#7 lore raw
In reply to a message not in the archive

Attention is currently required from: flichtenheld, ordex, plaisthos.

Hello flichtenheld, plaisthos,

I'd like you to reexamine a change. Please visit

    http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email

to look at the new patch set (#3).

The following approvals got outdated and were removed:
Code-Review+2 by flichtenheld

The change is no longer submittable: Code-Review and checks~ChecksSubmitRule are unsatisfied now.

Change subject: README.dco: update Linux instructions
......................................................................

README.dco: update Linux instructions

Update the README.dco file by including instructions related to the new 'ovpn' linux kernel module.

Change-Id I22af9957b27785514d8c6d58fe4f2100d007fa5c

---
M README.dco.md

1 file changed, 14 insertions(+), 19 deletions(-)

git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/87/1087/3

README.dco.md +14 -19
index 3f7e00c..a93dc94 100644
@@ -14,26 +14,22 @@
 
 Getting started (Linux)
 -----------------------
-- Use a recent Linux kernel. Linux 5.4.0 and newer are known to work with
-  ovpn-dco.
+The new DCO linux kernel module (namely `ovpn`) has been merged upstream
+as of linux-6.16. From this kernel version onwards you directly get
+the DCO module as shipped by your kernel.
+NOTE: the new `ovpn` Linux kernel module is compatible only with OpenVPN
+2.7 and greater.
 
-Get the ovpn-dco module from one these urls and build it:
+Alternatively, if you run an older kernel or if you want to use a more
+recent DCO module than the one shipped by your kernel, you need to use
+the ovpn-backports project.
 
-* https://gitlab.com/openvpn/ovpn-dco
-* https://github.com/OpenVPN/ovpn-dco
+To learn how to use the ovpn-backports project and build your own DCO
+kernel module, please refer to the README file available at:
 
-e.g.
+  https://github.com/OpenVPN/ovpn-backports/blob/main/README.md
 
-    git clone https://github.com/OpenVPN/ovpn-dco
-    cd ovpn-dco
-    make
-    sudo make install
-
-If you want to report bugs please ensure to compile ovpn-dco with
-`make DEBUG=1` and include any debug message being printed by the
-kernel (you can view those messages with `dmesg`).
-
-Clone and build OpenVPN (or use OpenVPN 2.6+). For example:
+Then clone and build OpenVPN (or use OpenVPN 2.7+). For example:
 
     git clone https://github.com/openvpn/openvpn.git
     cd openvpn
@@ -48,8 +44,8 @@
 data channel offloading, OpenVPN will automatically disable DCO support and
 warn the user.
 
-Should OpenVPN be configured to use a feature that is not supported by ovpn-dco
-or should the ovpn-dco kernel module not be available on the system, you will
+Should OpenVPN be configured to use a feature that is not supported by ovpn
+or should the ovpn kernel module not be available on the system, you will
 see a message like
 
     Note: Kernel support for ovpn-dco missing, disabling data channel offload.
@@ -131,4 +127,3 @@
 - `--persist-tun` not tested;
 - IPv6 mapped IPv4 addresses need Linux 5.4.189+/5.10.110+/5.12+ to work;
 - some incompatible options may not properly fallback to non-dco;
-- no per client statistics. Only total statistics available on the interface.

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings

Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I22af9957b27785514d8c6d58fe4f2100d007fa5c
Gerrit-Change-Number: 1087
Gerrit-PatchSet: 3
Gerrit-Owner: ordex <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Attention: ordex <[email protected]...>
Gerrit-MessageType: newpatchset

#8 lore raw
In reply to a message not in the archive

Attention is currently required from: ordex, plaisthos.

flichtenheld has posted comments on this change. ( http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email )

Change subject: README.dco: update Linux instructions
......................................................................

Patch Set 3: Code-Review+2

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings

Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I22af9957b27785514d8c6d58fe4f2100d007fa5c
Gerrit-Change-Number: 1087
Gerrit-PatchSet: 3
Gerrit-Owner: ordex <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: ordex <[email protected]...>
Gerrit-Comment-Date: Wed, 16 Jul 2025 13:51:22 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment

#9 lore raw

PATCH v3 1/1 README.dco: update Linux instructions

In reply to a message not in the archive

From: Antonio Quartulli <[email protected]...>

Update the README.dco file by including instructions related to the new 'ovpn' linux kernel module.

Change-Id I22af9957b27785514d8c6d58fe4f2100d007fa5c

---

This change was reviewed on Gerrit and approved by at least one developer. I request to merge it to master.

Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1087
This mail reflects revision 3 of this Change.

Acked-by according to Gerrit (reflected above):
Frank Lichtenheld <[email protected]...>

README.dco.md +14 -19
index 3f7e00c..a93dc94 100644
@@ -14,26 +14,22 @@
 
 Getting started (Linux)
 -----------------------
-- Use a recent Linux kernel. Linux 5.4.0 and newer are known to work with
-  ovpn-dco.
+The new DCO linux kernel module (namely `ovpn`) has been merged upstream
+as of linux-6.16. From this kernel version onwards you directly get
+the DCO module as shipped by your kernel.
+NOTE: the new `ovpn` Linux kernel module is compatible only with OpenVPN
+2.7 and greater.
 
-Get the ovpn-dco module from one these urls and build it:
+Alternatively, if you run an older kernel or if you want to use a more
+recent DCO module than the one shipped by your kernel, you need to use
+the ovpn-backports project.
 
-* https://gitlab.com/openvpn/ovpn-dco
-* https://github.com/OpenVPN/ovpn-dco
+To learn how to use the ovpn-backports project and build your own DCO
+kernel module, please refer to the README file available at:
 
-e.g.
+  https://github.com/OpenVPN/ovpn-backports/blob/main/README.md
 
-    git clone https://github.com/OpenVPN/ovpn-dco
-    cd ovpn-dco
-    make
-    sudo make install
-
-If you want to report bugs please ensure to compile ovpn-dco with
-`make DEBUG=1` and include any debug message being printed by the
-kernel (you can view those messages with `dmesg`).
-
-Clone and build OpenVPN (or use OpenVPN 2.6+). For example:
+Then clone and build OpenVPN (or use OpenVPN 2.7+). For example:
 
     git clone https://github.com/openvpn/openvpn.git
     cd openvpn
@@ -48,8 +44,8 @@
 data channel offloading, OpenVPN will automatically disable DCO support and
 warn the user.
 
-Should OpenVPN be configured to use a feature that is not supported by ovpn-dco
-or should the ovpn-dco kernel module not be available on the system, you will
+Should OpenVPN be configured to use a feature that is not supported by ovpn
+or should the ovpn kernel module not be available on the system, you will
 see a message like
 
     Note: Kernel support for ovpn-dco missing, disabling data channel offload.
@@ -131,4 +127,3 @@
 - `--persist-tun` not tested;
 - IPv6 mapped IPv4 addresses need Linux 5.4.189+/5.10.110+/5.12+ to work;
 - some incompatible options may not properly fallback to non-dco;
-- no per client statistics. Only total statistics available on the interface.
#10 lore raw

[Openvpn-devel] [PATCH applied] Re: README.dco: update Linux instructions

Documentation updates are good :-) - thanks Frank for reviewing.

Your patch has been applied to the master branch.

commit 3fdbad843550372ddaada223ef14dc1d935481d3

Author: Antonio Quartulli
Date:   Wed Jul 16 15:54:25 2025 +0200
     README.dco: update Linux instructions

     Signed-off-by: Antonio Quartulli <[email protected]...>
     Acked-by: Frank Lichtenheld <[email protected]...>
     Message-Id: <[email protected]...>
     URL: https://www.mail-archive.com/[email protected]/msg32180.html
     Signed-off-by: Gert Doering <[email protected]...>

--
kind regards,

Gert Doering

#11 lore raw
In reply to a message not in the archive

cron2 has uploaded a new patch set (#4) to the change originally created by ordex. ( http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email )

The following approvals got outdated and were removed:
Code-Review+2 by flichtenheld

Change subject: README.dco: update Linux instructions
......................................................................

README.dco: update Linux instructions

Update the README.dco file by including instructions related to the new 'ovpn' linux kernel module.

Change-Id I22af9957b27785514d8c6d58fe4f2100d007fa5c

Message-Id: <[email protected]...>
URL: https://www.mail-archive.com/[email protected]/msg32180.html

---
M README.dco.md

1 file changed, 14 insertions(+), 19 deletions(-)

git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/87/1087/4

README.dco.md +14 -19
index 3f7e00c..a93dc94 100644
@@ -14,26 +14,22 @@
 
 Getting started (Linux)
 -----------------------
-- Use a recent Linux kernel. Linux 5.4.0 and newer are known to work with
-  ovpn-dco.
+The new DCO linux kernel module (namely `ovpn`) has been merged upstream
+as of linux-6.16. From this kernel version onwards you directly get
+the DCO module as shipped by your kernel.
+NOTE: the new `ovpn` Linux kernel module is compatible only with OpenVPN
+2.7 and greater.
 
-Get the ovpn-dco module from one these urls and build it:
+Alternatively, if you run an older kernel or if you want to use a more
+recent DCO module than the one shipped by your kernel, you need to use
+the ovpn-backports project.
 
-* https://gitlab.com/openvpn/ovpn-dco
-* https://github.com/OpenVPN/ovpn-dco
+To learn how to use the ovpn-backports project and build your own DCO
+kernel module, please refer to the README file available at:
 
-e.g.
+  https://github.com/OpenVPN/ovpn-backports/blob/main/README.md
 
-    git clone https://github.com/OpenVPN/ovpn-dco
-    cd ovpn-dco
-    make
-    sudo make install
-
-If you want to report bugs please ensure to compile ovpn-dco with
-`make DEBUG=1` and include any debug message being printed by the
-kernel (you can view those messages with `dmesg`).
-
-Clone and build OpenVPN (or use OpenVPN 2.6+). For example:
+Then clone and build OpenVPN (or use OpenVPN 2.7+). For example:
 
     git clone https://github.com/openvpn/openvpn.git
     cd openvpn
@@ -48,8 +44,8 @@
 data channel offloading, OpenVPN will automatically disable DCO support and
 warn the user.
 
-Should OpenVPN be configured to use a feature that is not supported by ovpn-dco
-or should the ovpn-dco kernel module not be available on the system, you will
+Should OpenVPN be configured to use a feature that is not supported by ovpn
+or should the ovpn kernel module not be available on the system, you will
 see a message like
 
     Note: Kernel support for ovpn-dco missing, disabling data channel offload.
@@ -131,4 +127,3 @@
 - `--persist-tun` not tested;
 - IPv6 mapped IPv4 addresses need Linux 5.4.189+/5.10.110+/5.12+ to work;
 - some incompatible options may not properly fallback to non-dco;
-- no per client statistics. Only total statistics available on the interface.

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings

Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I22af9957b27785514d8c6d58fe4f2100d007fa5c
Gerrit-Change-Number: 1087
Gerrit-PatchSet: 4
Gerrit-Owner: ordex <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-MessageType: newpatchset

#12 lore raw
In reply to a message not in the archive

cron2 has submitted this change. ( http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email )

Change subject: README.dco: update Linux instructions
......................................................................

README.dco: update Linux instructions

Update the README.dco file by including instructions related to the new 'ovpn' linux kernel module.

Change-Id I22af9957b27785514d8c6d58fe4f2100d007fa5c

Message-Id: <[email protected]...>
URL: https://www.mail-archive.com/[email protected]/msg32180.html

---
M README.dco.md

1 file changed, 14 insertions(+), 19 deletions(-)
README.dco.md +14 -19
index 3f7e00c..a93dc94 100644
@@ -14,26 +14,22 @@
 
 Getting started (Linux)
 -----------------------
-- Use a recent Linux kernel. Linux 5.4.0 and newer are known to work with
-  ovpn-dco.
+The new DCO linux kernel module (namely `ovpn`) has been merged upstream
+as of linux-6.16. From this kernel version onwards you directly get
+the DCO module as shipped by your kernel.
+NOTE: the new `ovpn` Linux kernel module is compatible only with OpenVPN
+2.7 and greater.
 
-Get the ovpn-dco module from one these urls and build it:
+Alternatively, if you run an older kernel or if you want to use a more
+recent DCO module than the one shipped by your kernel, you need to use
+the ovpn-backports project.
 
-* https://gitlab.com/openvpn/ovpn-dco
-* https://github.com/OpenVPN/ovpn-dco
+To learn how to use the ovpn-backports project and build your own DCO
+kernel module, please refer to the README file available at:
 
-e.g.
+  https://github.com/OpenVPN/ovpn-backports/blob/main/README.md
 
-    git clone https://github.com/OpenVPN/ovpn-dco
-    cd ovpn-dco
-    make
-    sudo make install
-
-If you want to report bugs please ensure to compile ovpn-dco with
-`make DEBUG=1` and include any debug message being printed by the
-kernel (you can view those messages with `dmesg`).
-
-Clone and build OpenVPN (or use OpenVPN 2.6+). For example:
+Then clone and build OpenVPN (or use OpenVPN 2.7+). For example:
 
     git clone https://github.com/openvpn/openvpn.git
     cd openvpn
@@ -48,8 +44,8 @@
 data channel offloading, OpenVPN will automatically disable DCO support and
 warn the user.
 
-Should OpenVPN be configured to use a feature that is not supported by ovpn-dco
-or should the ovpn-dco kernel module not be available on the system, you will
+Should OpenVPN be configured to use a feature that is not supported by ovpn
+or should the ovpn kernel module not be available on the system, you will
 see a message like
 
     Note: Kernel support for ovpn-dco missing, disabling data channel offload.
@@ -131,4 +127,3 @@
 - `--persist-tun` not tested;
 - IPv6 mapped IPv4 addresses need Linux 5.4.189+/5.10.110+/5.12+ to work;
 - some incompatible options may not properly fallback to non-dco;
-- no per client statistics. Only total statistics available on the interface.

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1087?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings

Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I22af9957b27785514d8c6d58fe4f2100d007fa5c
Gerrit-Change-Number: 1087
Gerrit-PatchSet: 4
Gerrit-Owner: ordex <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-MessageType: merged